Description

High Flow Valves is designed to prevent the build-up of pressure in applications by moving large quantities of air quickly and automatically. Capable of providing both pressure and vacuum relief at an opening point of 0.50 psi ± 0.25 psi in both directions for fast decompression, it ensures that the goods inside are protected against extreme pressure and allows safe access into the application.

  • Perfect Substitute from Rupture Disks
    Rupture Disk is a piece of common equipment used to protect applications from overpressurizing. However, the downside is that the Rupture Disk is a single-use device and that needs replacement once used or over-pressurized. The High Flow Valves, on the other hand, is reusable and can provide rapid decompression in 15 seconds for typical cargos with a high flow rate of up to 140 SCFM.
  • Best Protection from Atmospheric Pressure
    The High Flow Valve is also capable of providing atmospheric pressure protection for containers of over 1,100 ft.³. Atmospheric pressure protection is needed as airborne transport of large volume containers require large volumes of moving air to prevent explosion caused by atmospheric pressure changes due to altitude.

Easy to Use:
The High Flow Valve incorporates a manual release button that allows safe and easy entry into the enclosure even when it is under vacuum conditions or pressurized. A retaining clip is secured to prevent the button from misuse while a lanyard is attached to the clip to avoid misplacement. With only 1.25” wide from the container wall to the tip of the manual release button, the High Flow Valve can also be installed into container walls with a thickness of up to 1/2” easily.

Key Features

Product Features

  • Prevent pressure buildup and remove large air quantities
  • Protect goods from extreme pressure
  • Easy to install
  • Pressure and vacuum relief at opening point of 0.50 psi ± 0.25 psi in both directions.

High Flow Valves Brochure

Download