The Tabletop Vacuum Sealer is an outstanding vacuum sealer, applicable for applications that require the removal of air from a bag before sealing. This vacuum sealer is best suitable for lower volume applications requiring an industrial quality machine yet providing an efficient process. It features a quiet venturi vacuum system and a low-pressure jaw safety system that will not move into the high-pressure cycle if an obstruction is detected. Specification of a precise combination of parameters will ensure excellent seals every time. Additional standard features and other options are also available for this versatile Tabletop Vacuum Sealer.
Sealing Features
Single side impulse heater bar with opposing pressure bar (bottom jaw heated) for seal reliability
Pneumatically operated sealing jaw for high-pressure sealing
Independent digital seal and cool timers ensure accurate settings
Optional SureTemp temperature controller ensures seal quality
Vacuum Features
Type 60 Venturi Vacuum pump for fast and quiet air evacuation and low maintenance
Single Vacuum/Gas Flush Nozzle (snorkel) to accommodate narrow or wide bags
Digital timers for each stage of vacuum and gas flush (when applicable)
Safety Features
Spring close jaw safety system with the release if an obstruction is detected
Jaw close timeout with release when a delay is detected
Heavy-duty seal transformer(s) with thermal overload protection
Seal Length: 20″, 25″, 30″
Seal Width: 5/16″
Activation: Footswitch
Air Requirement (min): 100 psi
Electrical Requirement: 120V
Dimensions (W x D x H): 23″ – 33″ x 15″ x 8″
Shipping Dimensions (W x D x H): 33″ x 19″ x 14″
Shipping Weight (approx): 60 lbs
Warranty: 2 years limited
Country of Manufacture: USA
Vacuum Options
Gas Flush: For extending shelf life via modified atmosphere packaging
Multi-Stage: Perform multiple vacuum and gas cycles to achieve lower residual oxygen level
Dual Stainless Steel Nozzles: For vacuum packaging two bags at a time
Vacuum Level Sensor: Ensures consistent vacuum levels are achieved every cycle
Vacuum Relief Valve: Sets a maximum vacuum level to prevent product damage
Footswitch or timed vacuum control
Sealing Options
Suretemp™ Temperature Controller: ensures consistent seal quality (up to 350°F) by accurately controlling temperature via a thermocouple
Bi-active Seal: Top and bottom heated seal bars for thick materials or reducing seal time
Seal Jaw Selector Switch (bi-active version only): Allows the bottom seal jaw to be turned off
Seal Only Switch: Retracts nozzles for use as a bag sealer (no vacuum)
Other Options
SureSeal Digital Interface: Includes 9 program job storage, cycle counter, and multiple vacuum/gas cycles when ordered with gas flush
Ported Exhaust: For plumbing exhaust out of a cleanroom
Stainless Steel Construction: For wet or corrosive environments
Floor stand: For use on the floor instead of on a table
WorkShelf: Supports the product during the packaging cycle (20″ wide x 8″ deep)