Condensation Terminator Sheet

Condensation Terminator Sheet

The Condensation Terminator Sheet (CT Sheet) is a countermeasure solution used to prevent moisture damage in cargo and at the same time, measure the moisture damage in shipment.

Shipping Container Condensation

Condensation occurs when water vapour in the container’s air turns into a liquid, rises, and condenses on the walls and roof of the container, forming water droplets. As the container walls are made from metallic materials that are great insulators of temperature, condensation occurs readily as the environment easily influences the temperature of the container. As condensation occurs frequently, the water droplets accumulate and become denser, eventually falling and dripping onto the surface of the goods. This results in packaging deterioration, corrosion, mild dew, moulding, and other damages caused by the water droplets occur if no action is taken. Further damage may occur within the packaging resulting in more significant losses.

Condensation Terminator Sheet

The Condensation Terminator Sheet is a water-absorbing sheet that functions by catching condensation droplets from the walls of the container. Not only does the CT Sheet acts as a barrier to water droplets, but it is also durable and does not sag. Hence, water leakage will not happen even after absorbing a large amount of water.

Things to Note
  • Maintain a 20cm gap between the CT Sheet and ceiling of the cargo
  • Cargo should not be touching the CT Sheet
  • Ensure that the surface of the cargo and CT Sheet does not have any dirt or oil.
  • Ensure that tape areas of the container are dry so that CT Sheet does not fall off and remains fixed
  • Lashing rings are needed to attach CT Sheets at roof corners
  • CT Sheet should be stored in a warm environment

The Condensation Terminator Sheet is an easy to use and cost-effective solution to prevent moisture damage in containers. No cleaning is required after each use, and it can be easily stored. Although it is applicable for a broad range of goods, performance may differ due to the cargo’s environmental conditions and physical properties.


The CT Sheet is designed with special hooks to be hooked to lashing rings and tied to lashing bars at the corners. The inner side and door side of the CT Sheet should be attached to the ceiling with adhesive tapes. The CT Sheet is also applicable in the following:

  • Metal
  • Machines
  • Medicine
  • Detergent
  • Cosmetics
  • Food
  • No obvious sagging
  • Simple installation
  • No need to clean up
  • Prevents moisture damage
  • Versatile, applicable for a wide variety of goods
  • Separable into burnable and non-combustible

Condensation Terminator Sheet Product Brochure: Download

Enquire About Product



We would like to hear from you. Please send us a message by filling out the form below and we will get back to you shortly.