The Nitrogen Purging System 1000 Dual Voltage is designed to maximise dry gas purging. As a fully self-contained and portable nitrogen purging system that simply connects the equipment to the purge connection of the device, the Nitrogen Enhanced Purging System 1000 Dual Voltage is also highly versatile. It is available with a self-contained pump and molecular sieve to allow users to operate both in the field or workshop environment, depending on their needs. Made to be user-friendly, the Nitrogen Enhanced Purging System 1000 Dual Voltage allows users to program the system to view display dewpoint measurements and control values in Degree Celsius or Fahrenheit with pressure in Kpa or psi. Featuring a selection of four in-built testing capabilities, the Nitrogen Enhanced Purging System 1000 Dual Voltage allows the verification of sealing standards of the equipment to be purged. Pressure testing can be done at pressures from 10.3 Kpa (1.5 psi) to 34.4 Kpa (5.0 psi). The pressure leak rate display is 0.01 psi.
The incorporated dewpoint monitor provides users with the dryness of the gas before the commencement of the purging operation. Its dewpointstat feature allows users to determine the amount of moisture within the equipment and implement an optimised gas and purging procedure for production control. After removing the dewpoint sensor option, the Nitrogen Enhanced Purging System 1000 Dual Voltage will monitor the dewpoint dryness’s progress, switch off, and isolate the dry gas when the selected dewpoint is met. A data logger can be used to monitor the degradation time of the dewpoint, allowing users to calculate the water vapour transmission rate (WVTR) and determine the water removal rate during the initial purging phase. A highly versatile purging system, the Nitrogen Purging System 1000 Dual Voltage can operate from global country voltages and frequencies ranging from 100 to 230 VAC at 50-60 Hz. A 24VDC version is also available.
Click here to view the other Nitrogen Purging Systems (NEPS).